FEATURES
STYLIZED OTTOMAN
Wide Heavy Ganuge Links.
Built-in Articulating Elevated Mid-Ottoman.
GEOMETRICALLY BALANCED
Geometry used to balance chair operation.
HANDLE/LEVER ACTIVATED & GRAVITY OPERATED
Handle/Lever used for release only.
DIRECT DRIVE WITH DOUBLE LOCKS
Direct Drive with Double Over-center-locks.
MINIMUM STACKUP
Flatter links supporting chair.
Wider base mounting points.
METAL ROCKER BASE ASSEMBLY
Welded metal base assembly.
Adjustable Balance.
EXTENDED LIFT RIVET JOINTS
Acetal and bronze rivet bushings.
Nylon stop pin bushings.
INTERCHANGEABLITY WITH OMEGA RELINERS
COMPARED WITH 4151

BENEFITS
Strength , durability , and Satety.
Maximum safety and comfort.
Comsistent and easy operation for any person.
Ease of operation & comfort.
Maximum synchronization of sides Positive locking of both sides.
Greater bending resistance .
Greater stability and strength.
Maximum strength and durability.
Balanced Rock on different style chairs.
Reduced wear and increased durability.
Reduced noise.
One Frame.

COMMENTS
Profile shape designed for safety and appearance without pinch points.
Articulating design allows use of wider & higher mid-ottoman for elimination of entrapment areas and for leg support.
Occupant's weight used to balance iperation instead of springs. Therefore , the opening ,closing ,ottoman firmness ,and back balance while
reclining vary with the weight of the occupant making the operation consistant from one person to the next . Springs are used for locking and
the initial start of the opening.
Occupant's weight opens chair, handle/lever only unlocks mechanism. Slight footrest pressure closes ottoman.
Square drive tube connects to and controls both left & right sides .
Ottoman is locked closed on both sides .
Improved weight capacity and durability (250 pound occupant Weight ).
Mechanism base width is closer to seat width while maintaining sufficient clearance between links to eliminate possibility of interference.
All tubular cross members for maximum resistance to twisting and bending .Flat plastic glide allows base to be longer for resistance to tipping over without interfering with chair frame whenrocking backward-more rock & shorter frames.
Seven base positions and three cam positions for balancing rock.
All rivet joints have either acetal(Delrin) or Bronze bushings and acetal spacers to eliminate any steel-to-steel contace.
No metal-to-metal noises when links contact stop pins.
All Recliners are interchange able in the same frame if the frame is constructed for Rocker and Two-Motor Lift.
Horizontal installation is applied for YH805 mechanism.
All the other functions are the same.